-
WEBINAR || What’s New in CONVERGE 3.0
Online Event, February 27, 2020
In this course we will offer a brief introduction to some of the new
features and enhancements in CONVERGE 3.0.
-
WEBINAR || Engine Aftertreatment Modeling
Online Event, February 26, 2020
This workshop will focus on Urea/SCR engine aftertreatment modeling
in CONVERGE.
-
WEBINAR || Emissions Modeling
Online Event, February 25, 2020
In this lecture we will discuss the options available in CONVERGE
and best practice recommendations to obtain accurate engine-out
emissions.
-
Machine Learning for Fluid Mechanics: Analysis, Modeling, Control and Closures - von Karman Lecture Series
Course, Waterloosesteenweg 72, Sint-Genesius-Rode (near Brussels), Belgium, February 24, 2020
This new course aims at providing a unified treatment of the
machine learning tools that are now paving the way towards
advanced methods for model order reduction, system
identification, and flow control. The course will gather
ideas and notions from various fields, starting from the
data decompositions that were pioneered in fluid mechanics
and moving towards machine learning methods that were
initially developed in machine vision, pattern recognition,
and artificial intelligence.
-
WEBINAR || Chemistry Tools
Online Event, February 24, 2020
CONVERGE includes a variety of tools to perform simplified kinetics
calculations and to manipulate and evaluate chemical kinetic
mechanisms.
-
CAS Computational Fluid Dynamics
Course, HSR Hochschule für Technik Rapperswil, Rapperswil, Switzerland, February 20, 2020
In this on-the-job vocational training CAS Computational Fluid Dynamics you will learn how to apply the relevant theoretical and practical tools to allow you to execute complex simulations.
-
Applied Computational Fluid Dynamics for Engineers
Workshop, Quest Bella Vista 24 Norbrik Drive, Bella Vista (Sydney), Australia, February 20, 2020
This workshop provides engineers with in-
structions to set up a CFD model (geometry, mesh
generation,
boundary conditions, turbulence & numerical models) to
obtain more reliable data compared by test results.
Last but not least, a practical demonstration session is
also included as
part of the workshop to present some tips and tricks of
CFD appli- cation in
particular industries, such as aerodynamics,
hydrodynamics, heat &
thermal comfort, rotating machinery, oil & gas, medical,
etc.
-
Course on Industry Oriented CFD analysis , From 15-February-2020 , 10 AM, Regular , Full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, February 15, 2020
1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 18 years experience in Aerospace Industry.
-
International Microfluidics Conference
Conference, holiday in rome Aurelia, Boulder, CO 80302, Rome, Italy, February 14, 2020
Gavin Conferences welcomes participants from all over the
world to attend the CPD accredited “International
Microfluidics Conference”. Microfluidics 2020 is a two-
day congress going to be held at Rome, Italy from
February 14-15th, 2020.
-
International Microfluidics Conference
Conference, holiday in rome Aurelia, Boulder, CO 80302, Rome, Italy, February 14, 2020
Gavin Conferences welcomes participants from all over the
world to attend the CPD accredited “International
Microfluidics Conference”. Microfluidics 2020 is a two-
day congress going to be held at Rome, Italy from
February 14-15th, 2020.
Theme: Microfluidic Research Trends and Techniques.
https://microfluidics.gavinconferences.com
-
Radial Compressor Design and Optimization
Course, Waterloosesteenweg 72, Sint-Genesius-Rode, Belgium, February 10, 2020
This short course is the regular course on radial
compressors thought at VKI to the turbomachinery students
specializing in compressors in the context of the “Research
Master in Fluid Dynamics”. It provides an overview of the
present knowledge and flow models and intends to provide a
good background for the people interested in the aerodynamic
design of radial compressors.
-
OpenFOAM® Adjoint Shape Optimisation Course
Course, Neu Isenburg, Germany, February 5, 2020
Both the computation of the so-called sensitivity maps and the full optimisation
process will be covered, including shape and mesh morphing. The theoretical
background is accompanied by hands-on training focusing on the set-up of the
OpenFOAM adjoint solver, discussing its capabilities and following the steps
required to perform a shape optimisation loop.
-
Tecplot Visualization Day
Workshop, Dept. of Mathematics, Celestijnenlaan 200 B, Leuven, Belgium, February 5, 2020
Tecplot 360 Viz Day - Learn new and hidden techniques for 3D, 2D,
XY line plotting, cool animations, Python & macro scripting,
optimization of parametric simulations, and more!
Participants will have the opportunity to learn techniques that
help them in loading, post-processing, visualizing and sharing
large and complex data from numerical simulations as well as
experimental data.
-
Simerics European User Meeting
User Conference, VDI Haus, Stuttgart / Vaihingen, Germany, February 4, 2020
3rd European User Meeting at the VDI Haus in Stuttgart-Vaihingen on the 4th and 5th of February 2020.
-
Advanced course on Automotive CFD Analysis , From 01 - February - 2020 , 10 AM, Regular , Full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, February 1, 2020
Course developed with Automotive R&D Centers and over seas universities.
Projects covered in the course :
1. Subsystem level CFD analysis
A. CFD analysis of radiator
B. CFD analysis of condenser
C. CFD analysis of Charge Air cooler
2. Integrated level underhood Thermal analysis of full vehicle
3. CFD analysis of disk brake cooling
4. Aerodynamics analysis of sedan with perfect boundary layer modelling approach
-
Course on Industry Oriented CFD analysis , From 01-February-2020 , 10 AM, Regular , Full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, February 1, 2020
1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 18 years experience in Aerospace Industry.
-
What’s New in Simcenter Flotherm 2019.2 and Simcenter Flotherm XT 2019.3
Conference, Algeria, January 30, 2020
New enhancements to Simcenter Flotherm 2019.2 and Simcenter Flotherm XT 2019.3 electronics cooling software including: new results analysis mode and post processing automation; Simcenter Flotherm Package Creator, PCB copper thermal modeling options, and more.
-
WEBINAR || Advanced Topics in Internal Combustion Engine Modeling | Part 2
Online Event, January 30, 2020
In this workshop we will discuss timely and popular topics in internal
combustion (IC) engine modeling and some of the unique features of
CONVERGE that yield efficient and accurate simulations.
-
WEBINAR || Advanced Topics in Internal Combustion Engine Modeling | Part 1
Online Event, January 29, 2020
In this workshop we will discuss timely and popular topics in internal
combustion (IC) engine modeling and some of the unique features of
CONVERGE that yield efficient and accurate simulations.
-
WEBINAR || Non-Premixed Combustion Modeling
Online Event, January 28, 2020
In this workshop, we will discuss several combustion models that
can be used to simulate diffusion-controlled, non-premixed
combustion: direct chemistry approach (SAGE), Representative
Interactive Flamelet (RIF), 3-Zone Extended Coherent Flame Model
(ECFM3Z), and Flamelet Generated Manifold (FGM).
-
CAD & CFD in the Cloud: End-to-End Design Optimization
Online Event, January 23, 2020
In an exclusive webinar organized by Onshape and
SimScale, engineers will learn about all the benefits of a
cloud-based design process. The session will include a
demo of both tools, using an electronics cooling
example. The design of a printed circuit board created in
Onshape will be investigated with fluid flow simulation
and heat transfer analysis using SimScale to ensure that
heat is removed effectively and overheating is
prevented.
-
Standard OpenFOAM® Training Course - 2 Day
Course, Ferntree Gully, Australia, January 21, 2020
This class is suitable for those with limited or no prior
experience using OpenFOAM®. It includes a basic overview
of the library, discussion of the fundamentals of the
library, discretization schemes, linear solver settings
and case set up.
-
Introduction to Computational Fluid Dynamics - von Karman Institute Lecture Series
Course, Waterloosesteenweg 72, Sint-Genesius-Rode (near Brussels), Belgium, January 20, 2020
The objective of these lecture series on "Introduction to
CFD" is to provide an elementary tutorial presentation on
computational fluid dynamics (CFD), emphasizing the
fundamentals and surveying a variety of solution techniques
whose applications range from low speed incompressible flow
to hypersonic flow.
-
Course on Industry Oriented CFD analysis , From 16-January-2020 , 10 AM, Regular , Full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, January 16, 2020
1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 18 years experience in Aerospace Industry.
-
Course on Industry Oriented CFD analysis , From 02-January-2020 , 10 AM, Regular , Full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, January 2, 2020
1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 18 years experience in Aerospace Industry.
-
Advanced course on Automotive CFD Analysis , From 02 - January - 2020 , 10 AM, Regular , Full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, January 2, 2020
Course developed with Automotive R&D Centers and over seas universities.
Projects covered in the course :
1. Subsystem level CFD analysis
A. CFD analysis of radiator
B. CFD analysis of condenser
C. CFD analysis of Charge Air cooler
2. Integrated level underhood Thermal analysis of full vehicle
3. CFD analysis of disk brake cooling
4. Aerodynamics analysis of sedan with perfect boundary layer modelling approach
-
Mathematical Modeling for Complex Fluids
Course, Chemical Engineering Departments, NIT Jalandhar, Jalandhar, India, January 1, 2020
The contents of this short term course is designed to develop an understanding of mathematical models of complex fluids flow and its relevance to fundamental understanding and industrial application
-
Solid Edge 2020 Hands-On Workshop
Workshop, The Siemens Center, 60 MacPherson Road, Singapore 348615, Singapore, Singapore, January 1, 2020
Free Solid Edge 2020 Workshop
Solid Edge Synchronous CAD modeling tool will be
demonstrated in this free workshop. With the new
professional feature, Design engineers, Manufacturers
alike who are currently using Solidworks can improve the
speed & accuracy of CAD modeling, and easily perform the
process of Engineering development from Concept to Final
product.
-
Conjugate Heat Transfer Best Practices in CFD
Online Event, December 18, 2019
In this webinar, you will learn about conjugate heat
transfer best practices for a forced convection
electronics application. It will cover geometry
preparation, material assignments, boundary conditions,
result control tools, and post-processing. By the end of
this webinar, you will know if your CHT simulation
results are converged and can be trusted, and how to most
efficiently set up simulation control run parameters.
December 18, 11:00 ET / 17:00 CET
-
Industry Oriented CFD Analysis course , from 16-December-2019 , 9 AM, regular , full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, December 16, 2019
1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 17 years experience in Aerospace Industry.
-
Best Practice Guidelines for CFD of Turbulent Combustion including an introduction to machine learning tools
Course, Université Libre de Bruxelles, Avenue Franklin Roosevelt 50, Brussels, Belgium, December 11, 2019
The participants will learn the best practices in CFD of turbulent
combustion. It introduces the latest trends in the use of machine-
learning based approaches to improve the understanding of turbulent
reacting flow and develop more efficient and accurate numerical
models. The lectures of this course, all by well-known experts in the
field, cover from basics to applications. The course is partially based
on the ERCOFTAC Best Practice Guidelines on CFD of Turbulent
Combustion.
-
WEBINAR Nonlinear Material: Plasticity with Enterfea
Online Event, December 4, 2019
This collaborative webinar between SimScale and Enterfea
will explore plasticity and nonlinear materials in FEA
simulation.
- December 4, 14:30 CET.
- Free.
- A SimScale event hosted online via GoToWebinar.
Link ---> https://bit.ly/2OFl3sb
-
Applying CFD to Process and Plant Safety
Course, IIT, Roorkee, India, December 2, 2019
Objectives:
The primary objectives of the course familiarizing the
participants with:
i) fundamentals of process and plant safety
ii) real practices in different industries
iii) potential hazard scenarios and risk
assessment methodologies
iv) Best possible approaches
v) CFD approaches to assess the risks
vi) Case Studies
-
Industry Oriented CFD Analysis course , from 02-December-2019 , 9 AM, regular , full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, December 2, 2019
1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 17 years experience in Aerospace Industry.
-
Gothenburg Region OpenFOAM User Group Meeting
User Conference, Sven Hultins gata 9C, Gothenburg, Sweden, November 20, 2019
The purpose is to bring together people working with
OpenFOAM to get to know each other and share experiences.
The meeting is free of charge and open to anyone
(Gothenburg, Sweden, Europe etc.)
-
ISimT-19
Conference, Schloßstraße 18 - 25, Hohenkammer, Germany, November 19, 2019
Symposium on Innovative Simulations in Turbomachinery
-
Information meeting: CAS Computational Fluid Dynamics
HSR Hochschule für Technik Rapperswil, Rapperswil, Switzerland, November 19, 2019
The information meeting gives you more information about the on-the-job vocational training CAS Computational Fluid Dynamics that starts in February 2020.
-
Mechanical & Aerospace Engineering 2019
Conference, EuroSciCon Ltd, 40 Bloomsbury Way Lower Ground Floor, London, , London, United Kingdom, November 18, 2019
Welcome to the official website of 2019 7th European
Congress & Business Expo on Mechanical & Aerospace
Engineering. Mech Aero 2019 is organized by EuroSciCon.
The conference will be held in London, UK November 18-19.
-
Industry Oriented CFD Analysis course , from 15-November-2019 , 9 AM, regular , full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, November 15, 2019
1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 17 years experience in Aerospace Industry.
-
Pointwise for Automotive CFD Simulation Workshop
Workshop, München, Germany, November 14, 2019
Increase automotive simulation accuracy and efficiency with
meshing flexibility. Pointwise generates high-quality, high
aspect ratio meshes that are key to efficiency for demanding
automotive CFD simulations.
-
Mesh Generation with SimScale Webinar
Online, Germany, November 13, 2019
This webinar will cover a deep-dive into the new standard
mesher and demonstrate some performance improvements when
compared to the previous default mesher.
https://www.simscale.com/webinars-workshops/mesh-
generation-
simscale/
-
Workshop on How to Increase Ship CFD Simulation Accuracy, Efficiency with Pointwise Meshing Flexibility
Workshop, Hamburg, Germany, November 12, 2019
Increase ship CFD simulation accuracy and efficiency with
meshing flexibility. Pointwise generates high-quality, high
aspect ratio meshes that are key to CFD efficiency for high
Reynolds number marine simulations. Interactive
demonstrations and background information will show the how
and why of the automated mesh generation process in
Pointwise.
-
NUMECA International User Meeting
User Conference, Radisson Blu Royal Hotel, 47 Wolvengracht , Brussels, Belgium, November 12, 2019
Join NUMECA for a 3-day event featuring exciting case study
presentations from our own experts and industry leaders like CNES,
Safran, Emirates Team New Zealand, LMG Marin and many others...
Witness the unveiling of new game changing technology for CFD,
delivering high-precision results with next to zero pre-processing time!
Receive hands-on training from the experts in CFD.
-
17th Multiphase Flow Conference & Short Course
Course, Helmholtz-Zentrum Dresden - Rossendorf, Dresden, Germany, November 11, 2019
The goal of the workshop was to bring together experimental
and numerical practitioners, and to foster discussion and
exchange of knowledge.
The Short Course will address the interests of engineers,
chemists, physicists and technicians active in research and
design, who want to be informed about modern design methods
and tools for multiphase flows.
-
'Large Eddy Simulation (LES), hybrid LES-RANS, Detached Eddy Simulation (DES) and unsteady RANS
Workshop, Hotel Quality Hotel Panorama, Gothenburg, Sweden, November 11, 2019
A three-day course on
''Large Eddy Simulation (LES), hybrid LES-RANS, Detached
Eddy Simulation (DES) and unsteady RANS''
is given in Gothenburg, Sweden, Nov 11-13, 2019.
-
Introduction to Ground Testing Facilities - von Karman Institute Lecture Series
Course, Waterloosesteenweg 72, Sint-Geneius-Rode, Belgium, November 5, 2019
This course is organized for student and engineers to
provide a general understanding of the design, operation and
application of ground testing facilities from all speed
regimes. Experimental methodology is exposed as well as the
interpretation of the data and their extrapolation to real
situation. The course includes an on-site presentation of
the VKI facilities during a lab visit.
-
Industry Oriented CFD Analysis course , from 01-November-2019 , 9 AM, regular , full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, November 1, 2019
1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 17 years experience in Aerospace Industry.
-
Advanced course on Automotive CFD analysis , from 01-November-2019 , 10 AM, regular , full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, November 1, 2019
1.The course covers real time projects of Automotive Industry.
2.Two Months Full time duration course.
-
Webinar: How To Set Up a Cost-Effective Transient Simulation
Online Event, October 30, 2019
This webinar will dive into a transient simulation on our
standard CFD solver, looking at key setup parameters, and
how to speed the simulations up to obtain fast results.
https://bit.ly/31ZYlhX
-
Webinar: How To Set Up a Cost-Effective Transient Simulation
Online Event, October 30, 2019
This webinar will dive into a transient simulation on our
standard CFD solver, looking at key setup parameters, and
how to speed the simulations up to obtain fast results.
https://bit.ly/31ZYlhX
-
37. CADFEM ANSYS Simulation Conference
Conference, Kongress Palais Kassel, Kassel, Germany, October 16, 2019
The CADFEM ANSYS Simulation Conference is the annual meeting
meeting place for anyone involved with ANSYS and other simulation
simulation tools or thinking about getting started.
-
Industry Oriented CFD Analysis course , from 15-October-2019 , 9 AM, regular , full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, October 15, 2019
1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 17 years experience in Aerospace Industry.
-
7th ESI OpenFOAM Conference
Conference, Titanic Chaussee Hotel Berlin, Berlin, Germany, October 15, 2019
This event, organized by ESI OpenCFD, offers a unique
opportunity to be part of the current and future Governance
of OpenFOAM and interact with users and developers across
the OpenFOAM community. This is the OpenFOAM primary event
in all areas of CFD applications and Process integration.
Who should attend? CFD Engineers, Managers, IT
Specialists, Developers, Consultants, Researchers,
Students. The third day provides accredited trainings with
Continuing Professional Development hours.
-
From Zero to Hero - Learn Tecplot 360 Basics in 30 Minutes
Online Event, October 9, 2019
Get started with Tecplot 360 while learning best practices for plotting and analyzing your data.
This 30-minute Webinar will walk you through everything from loading your data to exporting images
and animations.
-
Aeronautic Solution Series Part 1 : Webinar on External Aero
Conference, Belgium, October 9, 2019
From propulsion, acoustics to external aero and optimization,
NUMECA’s powerful CFD Flow Integrated Environment dedicated to
Multiphysics helps you ensure your competitive advantage.
Our aeronautic solution series will provide you a full aero solution. The
first part of the series is a webinar dedicated to external aero for
supersonic, subsonic, passenger, light aircrafts and drones.
-
Introduction to Measurement Techniques - von Karman Lecture Series
Course, Waterloosesteenweg, Sint-Genesius-Rode, Belgium, October 7, 2019
The objective of this course is to provide young
engineers with a broad overview of traditional and
advanced measurement techniques applicable to fluid
dynamics
-
Fourth Midwest OpenFOAM User Group Meeting
User Conference, 599 Walter Library, 117 Pleasant St. SE, Minneapolis, United States, October 4, 2019
The Midwest OpenFOAM User Group (MOFUG) is pleased to
announce that the 2019 MOFUG Meeting will be hosted in
Minneapolis, Minnesota at the Minnesota Supercomputer
Institute and the Digital Technology Center.
-
Building Better Designs Using 1D/3D Simulation
Online Event, October 3, 2019
How can 1D/3D simulation help you to design better systems? Sign up to this web seminar to find out!
-
Webinar: Democratizing Marine CFD for Maneuvering
Belgium, October 2, 2019
During this Webinar, Numeca's CFD specialists will share examples of
maneuvering simulations that modern marine design teams have used
to gain a competitive edge.
-
Industry Oriented CFD Analysis course , from 01-October-2019 , 9 AM, regular , full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, October 1, 2019
1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 17 years experience in Aerospace Industry.
-
2nd Spanish HPC Combustion Workshop
Workshop, Barcelona Supercomputing Center, Barcelona, Spain, September 27, 2019
The 2nd Spanish HPC combustion workshop is dedicated to
present the state of the art in modelling and simulation
techniques for combustion applications in the national
context with representative research institutions. The
topics go from multiphase flow calculations, combustion
instabilities, alternative fuels, large-eddy simulations,
numerical methods for reacting flows to advance multiphysics
applications.
-
Color for Directors: Answering Difficult Engineering Questions
Online Event, September 26, 2019
Leverage the power of CAD-embedded CFD simulation to drastically improve engineering productivity.
-
Simulation Partikelbeladener Strömungen
Course, Institut für Mechanische Verfahrenstechnik und Mechanik, KIT, Karlsruhe, Germany, September 25, 2019
Die Simulation partikelbeladener Strömungen hat in den letzten Jahren aufgrund der immer größeren Leistungsfähigkeit von Computeranlagen eine weitreichende Bedeutung für die Auslegung von Verfahren, Maschinen und Anlagen in der Chemie, Verfahrenstechnik, Biotechnologie und vielen Zulieferindustrien erlangt. In diesem Kurs vom 25. bis 27. September in Karlsruhe erfahren Sie in einem Softwarepraktikum am Computer, wie Sie bei der Simulation einer mehrphasigen Strömung vorgehen.
-
SimXp - Energy Efficiency & Indoor Climate - Experiment & Simulation
Seminar, Fraunhoferstraße 10, Valley, Germany, September 24, 2019
The digital transformation of the construction industry is well
underway - keyword "Building Information Modelling - BIM", its
goal being innovative system solutions for buildings. The new
seminar SimXp, organised by the Fraunhofer Institute for
Building Physics IBP and the simulation specialist ISimQ, will
demonstrate how to combine simulation and experimental methods
to this end.
-
2019 CONVERGE User Conference–North America
Conference, New Orleans , United States, September 23, 2019
Gathering of CONVERGE users for presentations, networking, and
advanced training.
-
The 14th International Symposium on Numerical Analysis of Fluid Flows, Heat and Mass Transfer - Numerical Fluids 2019
Conference, Sheraton Hotel, Rhodes, Greece, September 23, 2019
Understanding fluid dynamics and heat transfer has been one
of the major advances of mathematics, physics and
engineering. Our symposium covers various subjects: from new
numerical methods and fundamental research until engineering
applications.
-
Workshop on Fundamental Understanding and Modelling of High Pressure Turbulent Premixed Combustion (HPTC)
Workshop, Munich, Germany, September 19, 2019
The workshop aims at contributing to fundamental physical
understanding of turbulent premixed (possibly stratified)
combustion at elevated pressures. It brings together
specialists with analytical, experimental and numerical
background with different perspectives to the topic of
understanding and modelling high pressure combustion as well
as experts from industry with a more application oriented
background.
-
CAESES Users Meeting 2019
User Conference, Hotel Abion Spreebogen Waterside, Berlin, Germany, September 18, 2019
This event is for all CAESES users but also for anyone
who is
interested in automated shape optimization with
simulation tools.
-
Industry Oriented CFD Analysis course , from 16-September-2019 , 9 AM, regular , full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, September 16, 2019
1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 17 years experience in Aerospace Industry.
-
Stokes200
Conference, Pembroke College, Cambridge, United Kingdom, September 15, 2019
A celebration of the remarkable scientific achievements of
Sir George Gabriel
Stokes two hundred years after his birth
-
Turbomachinery: Industrial Pump Design Optimization Webinar
Online Event, September 10, 2019
SimScale is announcing a free webinar on the 10th of September
to teach engineers how to virtually test and optimize the
design of an industrial pump without leaving the web browser.
-
4th Short Course & Forum on CFD in Rotary Positive Displacement Machines
Course, London, United Kingdom, September 7, 2019
This short course and forum is dedicated to advanced topics of modelling,
analysis, and the design of Positive Displacement Machines for industrial and
research use.
-
XII International Conference on Computational Heat, Mass and Momentum Transfer
Conference, Rome, Italy, September 3, 2019
Computational techniques and methods are evolutionary field
from macroscopic to nano level, using continuum and
discrete mechanics. It is necessary for scientists and
engineers to get together in a relaxed environment to
discuss new developments in computational methods and
applications, especially in the topic of fluid dynamics,
heat and mass transfer in non-reactive and reactive
processes. Also, it is good opportunity for new scientists
and engineers to explore the art of computational methods.
-
High Performance Computing Autumn Academy 2019
Course, Centre for Mathematical Sciences, Cambridge, United Kingdom, September 2, 2019
The overall aim of this course is to provide course
attendees with a strong background in programming
techniques suitable for general scientific programming.
-
2nd International CFD Summer School
Course, Palazzo Todeschini, Desenzano del Garda, Italy, September 2, 2019
CFD international summer school at Desenzano del Garda,
Italy, 2nd edition.
-
Industry Oriented CFD Analysis course , from 02-September-2019 , 9 AM, regular , full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, September 2, 2019
1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 17 years experience in Aerospace Industry.
-
Overcoming Operational Challenges with Fluid Systems Simulation
Online Event, August 29, 2019
In this complimentary web seminar you will learn about some operational challenges and understand how fluid systems simulation with Simcenter Flomaster can be leveraged to address them.
-
NUMAP-FOAM Summer School 2019
Workshop, Ivana Lucica 5, Zagreb, Croatia, August 19, 2019
Advanced OpenFOAM School with one-to-one tuition
-
Industry Oriented CFD Analysis course , from 16-August-2019 , 9 AM, regular , full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, August 16, 2019
1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 17 years experience in Aerospace Industry.
-
Lattice Boltzmann methods for multiphase and multicomponent flows
Workshop, India, August 5, 2019
The Centre for Fluid Dynamics, IIT Indore is organizing 10 days (2 hours
lecture and 1 hour practical session per day) Global
Initiative
of Academic Networks (GIAN) Course on 'Lattice Boltzmann methods
for
multiphase and multicomponent flows'. Prof. A.A. Mohamad, University
of
Calgary, Canada is the course instructor.
-
ICTFDC2019-1st International Conference of Thermal Fluid Dynamics and Control
Conference, Christchurch, New Zealand, August 2, 2019
The conference is a premier event in the
Aerospace/Thermal-fluids Science and Technology
communities. It brings together professors, engineers and
experts from academic
heat universities, research centres, gas turbine and
engine industries. The conference offers
excellent networking, collaborating and sharing
opportunities with attendees from many
research fields, disciplines and countries.
-
Simcenter Star CCM+ Conference 2019
Conference, The Siemens Center, 60 MacPherson Road, Singapore 348615, Singapore, Singapore, August 2, 2019
[Friday Aug 2 Seminar] How CFD Simulation can help you
create Greener Buildings
-
What’s New in Simcenter Flotherm and Simcenter Flotherm XT 2019.1
Online Event, August 1, 2019
A web seminar on Simcenter Flotherm and Simcenter Flotherm XT 2019.1 covering topics including; faster reduced order models for transient thermal simulation (BCI-ROM), electro-thermal modeling accuracy, through to optimization linkages to HEEDS software and more.
-
Industry Oriented CFD Analysis course , from 01-August-2019 , 9 AM, regular , full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, August 1, 2019
1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 17 years experience in Aerospace Industry.
-
8th Edition of International Conference & Exhibition on Separation TechniquesJuly 29, 30 2019Dublin, IrelandSeparation Techn
Conference, Highstone House, 165 High Street, 165 High Street, Barnet, Hertfordshire, United Kingdom, July 29, 2019
8th Edition of International Conference & Exhibition on
Separation Techniques
July 29, 30 2019
Dublin, Ireland
-
8th Edition of International Conference & Exhibition on Separation Techniques
Conference, Highstone House, Barnet, Hertfordshire, Canada, July 29, 2019
Separation Techniques 2019 Conference
-
Marine Craft Dynamic Motion with Simcenter Flomaster
Online Event, July 18, 2019
Come and learn about the new dynamic node elevation
capabilities introduced in Simcenter Flomaster 2019.1 in
marine applications.
-
International Conference on Computational Methods in Engineering and Health Sciences (ICCMEH 2019)
Conference, Faculty of Engineering, Universiti Putra Malaysia, Serdang, Malaysia, July 16, 2019
With the great success of the 4th International
Conference on Computational Methods in Engineering and
Health Sciences (ICCMEH 2017) held at Manipal Academy of
Higher Education (MAHE), India. Universiti Putra Malaysia
(UPM), Malaysia in collaboration with MAHE (India) and
Kyushu Institute of Technology (Japan) will be jointly
organizing the ICCMEH 2019 on July 16-17, 2019. It is our
pleasure to invite you to participate in ICCMEH 2019,
organized at, Faculty of Engineering, UPM, Malaysia.
-
Industry Oriented CFD Analysis course , from 15-July-2019 , 9 AM, regular , full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, July 15, 2019
1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 17 years experience in Aerospace Industry.
-
17th ERCOFTAC Osborne Reynolds Day
Conference, George Begg Building, Manchester, United Kingdom, July 12, 2019
The University of Manchester will be hosting the
prestigious ERCOFTAC Osborne Reynolds Day in 2019. The
competitions offer prestigious awards for
doctoral‐level researchers across the broad domain of fluid
mechanics
including turbulence, multi‐phase, stratified and free‐
surface flows, convective transport processes, combustion
and acoustics. PhD students or recent graduates from all UK
universities are eligible to enter.
-
Short-term training on Fire Modeling
Course, IIT Roorkee Campus Noida, Greater Noida, India, July 4, 2019
The course has the following aims:
(1) To give a broad introduction to fire safety science.
(2) To develop an understanding of the role of mathematical
modeling in fire safety science.
(3) To provide an introduction to the principles of heat
transfer and fluid dynamics.
(4) To introduce the concepts of Computational Fluid
Dynamics (CFD).
(5) To familiarize attendees with computational software
used in fire modeling.
-
Summer School in Engineering Computing
Course, Moscow, Russia, July 1, 2019
Moscow Engineering Physics Institute and Western Norway
University of Applied Sciences invite for the 4th
International Summer School in Engineering Computing.
-
Industry Oriented CFD Analysis course , from 01-July-2019 , 9 AM, regular , full time course
Course, No.84, 2nd Main, 4th cross, New Thippasandra, HAL 3rd stage , Bangalore, India, July 1, 2019
1. For the first time in CFD education field , we have
introduced complex projects like " CFD/ Thermal analysis of
advanced composite processing unit working at 2500 Degree
centigrade" and " CFD/Thermal analysis of Landing gear
Magnetic brake" , in addition to regular projects.
2) Courses taught by Mr.Rudresh Ganganna, Former Scientist-
ISRO, with 17 years experience in Aerospace Industry.
-
Summer School in Engineering Computing
Course, Moscow, Russia, June 29, 2019
Moscow Engineering Physics Institute and Western Norway
University of Applied Sciences invite for the 5th
International Summer School in Engineering Computing.
-
Course on advanced turbulence and transition modelling: RANS, LES and laminar-to-turbulent transition models
Course, Rektorska 4, Warsaw, Poland, June 27, 2019
The course introduces several advanced turbulence modeling
topics.
First one refers to the strengths and limitations of the RANS
modeling. This is followed by the discussion of the Large Eddy
Simulation (LES) with strong focus on the evaluation of the
quality of
the results. Finally, the laminar-to-turbulent transition
models
(including those present in the commercial solvers) are
discussed. As
a bonus, the lattice Boltzmann method with the implicit-LES
model is
introduced.
-
What’s New in Simcenter Flomaster 2019.1
Online Event, June 27, 2019
In this presentation we will introduce the new features in
Simcenter Flomaster 2019.1. This new release has focused on
extending Simcenter Flomaster’s simulation capabilities and
usability.
-
International Conference on Mechanical & Aerospace Engineering
Conference, Tokyo, Japan, June 24, 2019
EuroSciCon invites all the participants from over the
world to attend the “International Conference on
Mechanical & Aerospace Engineering” which is going to be
held in Tokyo, Japan on June 24-25, 2019.
-
Workshop on Computational Fluid Dynamics with Chemical Engineering Applications
Workshop, Dept. of Chemical Engineering, SRMIST, Kattankulathur, Chennai, India, June 24, 2019
A 5 days workshop on "Computational Fluid Dynamics with
Chemical Engineering Applications" is being conducted by the
Department of Chemical Engineering, SRM Institute of Science
and Technology, Kattankulathur from 24th June to 28th June
2019. General CFD aspects and the Chemical Engineering
perspectives of CFD with relevant applications are being
discussed in this 5 days workshop. Sessions are being
handled by eminent faculty from IIT Madras, NIT and
Scientists from R&Ds.
-
PyTecplot 30-Minute Quick Start
Online Event, June 20, 2019
The goal of this Webinar is to get you up and running with
PyTecplot, Tecplot
360’s Python API, in 30 minutes or less. We will use the
case of the Onera M6
Wing and export images of slices at multiple locations. This
simple case is
used for illustration, but we will also discuss more
complicated scenarios.
-
LES and DES: How to use an in-House Fortran source code
Workshop, Waterfront Hotel , Gothenburg, Sweden, June 17, 2019
The course includes lectures (12 hours) and workshops (12
hours) learning and using CALC-LES
|
