-
Intl. Conference on Computational and Experimental Engineering and Sciences (ICCES'05)
Conference, Hyderabad, India, December 1, 2005
The scope of ICCES embraces both classical topics in mechanics, as well as emerging scientific and engineering disciplines, such as: nano-science & technology; NEMS & MEMS; mechanics & chemistry of biosystems; micro-and nano-device modeling; multi-spatial & time-scale and multi-physics phenomena; functional and smart material systems; meshless (MLPG) and novel methods of computational modeling; novel material models such as gradient theories; novel experimental methods, etc.
-
Solving Dynamic Meshing Problems with FLUENT v6
Course, Fluent Inc., Ann Arbor, United States, December 1, 2005
This training course, offered in Fluent's Ann Arbor office, is designed for existing users of FLUENT.
-
Solving Dynamic Meshing Problems with FLUENT v6
Course, Fluent Inc., Ann Arbor, United States, December 1, 2005
This training course, offered in Fluent's Ann Arbor office, is designed for existing users of FLUENT.
-
Fluid Mechanics and CFD Review Course by Fluent
Course, Fluent Inc., Lebanon, United States, November 30, 2005
This two and a half-day course is intended for those users who are new to CFD and who need an introduction (or re- introduction) to fluid mechanics, heat transfer and computational fluid dynamics. The goal is to make you more successful at CFD by having a more thorough knowledge of the underlying physics and numerical techniques in our software.
-
1st Pratical CFD Seminar
Course, ATEC, Quinta do Anjo, Portugal, November 29, 2005
Pratical CFD Seminar in Portugal for Engineers and
Designers
-
Multiphase Flow Workshop
Workshop, Gothenburg, Sweden, November 21, 2005
We invite you to participate in a multiphase flow workshop
November 21-23 hosted by Fluent Sweden. The workshop is
intended for CFD engineers who face multiphase flow in
their daily routine and are looking for efficient ways of
ensuring reliable results. Multiphase flow covers a wide
range of physical phenomena, and the challenge for users
is choosing an appropriate model for a particular
application from the wide selection of possibilities.
-
Numeca User Meeting 2005
User Conference, Le Meridien Hotel, Brussels, Belgium, November 21, 2005
NUMECA User Meeting 2005 will be held at Le Meridien Hotel
in Brussels, Belgium on 21-22 November 2005.
This event will bring together engineers, designers,
scientists, and researchers in CFD analysis of industrial
flows and design optimization of turbomachinery blading
and
for two full days of user presentations, product seminars,
technical discussions and keynote presentations.
The topics of the meeting will include the most exciting
new developments in the NUMECA productline.
-
Italian ANSYS Users' Meeting 2005
User Conference, Villa Caroli-Zanchi, Stezzano (BG), Italy, November 18, 2005
Italian ANSYS, ANSYS CFX and ANSYS ICEM CFD users' meeting
-
Advanced Thermal Modeling Course
Course, Icepak, Santa Clara, United States, November 17, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Second European Workshop on Automatic Differentiation
Workshop, Cranfield UniversityCranfield University (, Shrivenham Campus, Swindon, United Kingdom, November 17, 2005
This is the second in a series of European Workshops providing a forum
for the presentation of theoretical developments in, and applications
of, Automatic Differentiation (AD) and adjoint methods.
-
Computational Fluid Models for Store and Stage Separations Webinar
Online Event, November 17, 2005
This webinar is particularly suited for engineers
interested
in using computational fluid dynamics (CFD) for solving
store separation and stage separation problems. Additional
general computed motions will be discussed as well.
-
Introduction to FLUENT
Course, Lebanon, United States, November 14, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Airpak
Course, Fluent Inc., Lebanon, United States, November 14, 2005
The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.
-
Introduction to Icepak
Course, Santa Clara, United States, November 14, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Large-scale Numerical Applications to Surface and Subsurface Flow and Transport Processes
Workshop, CRS4, POLARIS, Edificio 1, Pula (Cagliari), Italy, November 10, 2005
The workshop, organized by CRS4 in the frame of the
European Project EUA4X, is aimed at presenting an overview
of large
scale
field scenarios studied within a number of national and
international
projects in the context of surface and subsurface flow
modeling.
The case studies presented covers issues regarding water
cycle processes
and contaminant migration.
-
Fluid-Structure-Interaction with FLUENT and ABAQUS Webinar
Online Event, November 10, 2005
Please join us for this special event, Thursday, November
10, 2005 (2pm EST), to learn about the
finite element program ABAQUS and the fluid dynamics code
FLUENT provide best-in-class simulation solutions in
their respective application areas.
-
Gridgen Training
Course, 213 South Jennings Ave., Fort Worth, United States, November 8, 2005
The Gridgen Standard Training Course includes three days
covering both basic and advanced Gridgen usage. The most
commonly used GUI commands and efficient tools for making
grids quickly are thoroughly explained. The training
course progresses to more advanced tools and how to work
with difficult topologies and geometry models. Tutorials
will demonstrate the topics discussed and allow attendees
their own practice time with the newly learned tools.
-
Introduction to FLUENT
Course, Seattle, United States, November 7, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to FLUENT
Course, Fluent Inc., Ann Arbor, United States, November 7, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Icepak
Course, Austin, United States, November 7, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
STAR Deutschland Konferenz 2005
Conference, Munich Marriott Hotel, Berliner Str. 93, D-80805, Munich, Germany, November 7, 2005
CD-adapco, celebrating their 25th anniversary within the
CAE business, will be presenting the latest CAE/CFD
technology at the 2nd STAR Deutschland Konferenz on
November 7-8, 2005 at the Munich Marriott Hotel, Munich,
Germany.
-
Introduction to Icepak
Course, Lebanon, United States, November 2, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Introduction to FLUENT
Course, Lebanon, United States, October 31, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Fluent Webinar: Virtual Cooling Audits: A Fundamental Design Service for Data Center Facilities
Online Event, October 27, 2005
Managers of data center facilities, engineers, designers, or
anyone else responsible for data center thermal management
and equipment layout should attend this webinar to learn how
they can benefit from the use of airflow modeling to perform
virtual cooling audits of their facilities using a new
service from Fluent Inc. named CoolSim.
-
Advanced Training in FLUENT
Course, Lebanon, United States, October 24, 2005
This course is intended for experienced users of FLUENT v6 who are interested in more in-depth instruction on specific topics. Users may sign up for one or more days of instruction. Courses will consist of both lecture and hands-on examples.
-
Advanced Thermal Modeling Course
Course, Icepak, Ann Arbor, United States, October 24, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Flight Experiments for Hypersonic Vehicle Developmend - RTO Lecture Series
Course, Chaussee de Waterloo 72, B-1640 Rhode-St-Genese, Belgium, October 24, 2005
This VKI/RTO Lecture Series will present the perspectives
of international experts on past, present, and future flight experiment.
-
FLUENT Forum 2005
User Conference, Lisbon, Portugal, October 20, 2005
COMPUTATIONAL FLUID DYNAMICS - The innovation meeting - October 20th, 2005
-
Fluent Webinar: Morpher Based Shape Optimization for CFD Applications
Online Event, October 20, 2005
This webinar features step-by-step instruction showing how
to carry out a morpher based shape optimization exercise for
CFD analysis. Industry experts will present several shape
optimization scenarios involving real-world applications.
-
2nd Symposium on Advanced Turbulence Modeling for Industrial CFD
Conference, Guarapari, Brazil, October 19, 2005
The purpose of this symposium is to bring together researchers in the field of Turbulence Modeling to evaluate recent progresses, anticipate future modeling requirements and preview future research directions. Emphasis will be given to applications and solution of Industrial Problems. Authors are invited to participate in this event to expand international cooperation, understanding and dissemination of recent advances in the general area of Turbulence Modeling.
-
Fluent CFD Forum 2005
User Conference, Bad Nauheim, Germany, October 19, 2005
-
Introduction to FLUENT
Course, Lebanon, United States, October 17, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to FLUENT
Course, Fluent Inc., Ann Arbor, United States, October 17, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Airpak
Course, Fluent Inc., Lebanon, United States, October 17, 2005
The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.
-
Introduction to Airpak
Course, Fluent Inc., Atlanta, United States, October 17, 2005
The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.
-
Introduction to Icepak
Course, Santa Clara, United States, October 17, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Forum CFD Fluent 2005
User Conference, PARIS, France, October 13, 2005
-
Fluent Webinar: FloWizard 2 for University Users
Online Event, October 13, 2005
This webinar will inform the audience about the core
capabilities of Fluent’s newest CFD tool, FloWizard.
FloWizard is a rapid flow modeling CFD tool, meaning it is
designed from top to bottom for obtaining flow solutions in
an expedient fashion.
-
Fluent France Forum
User Conference, "le Tapis Rouge", PARIS, France, October 13, 2005
The 12nd edition of the Fluent Forum France was held on
October 13, 2005 to "le tapis rouge" in Paris. More than
300 participants answered our invitation, instituting this
day like event CFD of the year: industrialists and
academics, partners, press and association could
contribute to exchanges on the evolutions of the
engineering of virtual calculation.
-
Course, Paris, France, October 12, 2005
-
Advanced Training in FLUENT
Course, Houston, United States, October 12, 2005
This course is intended for experienced users of FLUENT v6 who are interested in more in-depth instruction on specific topics. Users may sign up for one or more days of instruction. Courses will consist of both lecture and hands-on examples.
-
Introduction to Measurement Techniques
Course, Chaussee de Waterloo 72, B-1640 Rhode-St-Genese, Belgium, October 10, 2005
The objective of this course is to provide young engineers with a broad overview of traditional and advanced measurement techniques applicable to fluid dynamics.
-
Introduction to FLUENT
Course, Houston, United States, October 10, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Icepak
Course, Austin, United States, October 10, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Integrating the FlowLab Virtual Fluids Laboratory into Engineering Curriculum
Online Event, October 6, 2005
This webinar will inform the audience about the core
capabilities of Fluent’s virtual fluids laboratory, FlowLab.
Case studies will be reviewed to highlight how this student-
friendly CFD tool has been used at the University of Iowa,
at Penn State University, and by other North American
universities.
-
Forum FLUENT 2005
User Conference, Madrid, Spain, October 6, 2005
-
TCN CAE 2005
Conference, Lecce, Lecce, Italy, October 5, 2005
International Conference on CAE and Computational Technologies.
The TCN-CAE 2005 event is an end-user-oriented conference in the fields of industrial design innovation and production process optimization. Researchers, experts from industry, and recognized speakers will highlight value and benefits arising from the application of the most-advanced CAE technologies.
-
EUA4X Project Event 09 - EUA4X Annual Conference
Conference, Convento di San Domenico, Lecce, Italy, October 5, 2005
The aim of the EUA4X 2005 Annual Conference is to provide a forum for the discussion of the latest developments of computational technologies for industry and to broaden their application to many other computation-oriented areas. The EUA4X 2005 Annual Conference will be hosted by the International Conference on CAE and Computational Technologies for Industry TCN CAE 2005.
-
Introduction to FLUENT
Course, Lebanon, United States, October 3, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
EUA4X Project Event 08 - Training Course: State-of-the-art in Numerical Grid Generation: From Theory to Practice
Course, University of Lecce / Convento di San Domenico, Lecce, Italy, October 3, 2005
The basic aim of the course is to provide a state of the art in numerical grid generation. Ranging from theoretical to application approaches the method overview deals with effective solutions of domain discretization problems occuring in computational field simulations.
20 EU fellowships are offered to young participants to attend the conference.
-
Introductory course ICEM CFD/AI*Env
Course, Oslo, Norway, October 3, 2005
Introductory course: ICEM CFD/AI*Env advanced meshing for CFD and FEA
-
8th Numerical Towing Tank Symposium
Conference, seaside hotel, Varna, Bulgaria, October 2, 2005
Nonlinear flows around marine structures (LES, RANSE, Euler with or w/o free surface)
Free-surface flows around marine structures (3-d seakeeping, free-surface viscous flows)
Related topics (validation experiments, numerical techniques, grid generation, etc)
-
Solving Ocean Engineering Problems Using Computational Fluid Dynamics
Online Event, September 29, 2005
During this one hour online session we will demonstrate how
flow modeling software can be used to complement your
organization's existing methods and tools in order to meet
the demanding needs of naval/ocean engineering applications.
-
Shape Optimization of CFD Applications
Course, Fluent Training Center, Ann Arbor, United States, September 27, 2005
This course, which will be held, Tuesday, Sept. 27, is designed to teach FLUENT users how to conduct shape optimization of CFD applications.
-
Gain the Competitive Edge in Motorsports with CFD Simulation
Online Event, September 27, 2005
This free webinar is intended to highlight relevant advanced modeling in the areas of fan design, realistic fan-system interactions, more realistic fan modeling approaches and discussion of possible ways to predict fan noise.
-
Introduction to FLUENT
Course, Santa Clara, United States, September 26, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Icepak
Course, Fluent Inc., Lebanon, United States, September 26, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Introduction to Icepak
Course, Lebanon, United States, September 26, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
iTi Conference on Turbulence 2005
Conference, Bad Zwischenahn, Germany, September 25, 2005
The objectives of this conference are comprising basic research as well as research related to application. Therefore, both engineers and physicists working in the field of turbulence are invited to join the conference. The invited speakers are presenting their contributions in fields of experimental, numerical, and theoretical research. Discussed topics are, for example, thermal convection, boundary layer at large Reynolds numbers, isotropic turbulence, numerical simulations, and related subjects ...
-
Fluent UK User Group Meeting 2005
User Conference, Hilton Hotel, Warwick, United Kingdom, September 22, 2005
Fluent Europe Limited warmly invites its commercial software users to the Fluent 2005 UK User Group Meeting, which takes place on 22 & 23 September at the Hilton Hotel in Warwick.
-
Performance-Driven Advanced Cooling Systems: A Primer for Thermal Solution Analysts and Designers
Online Event, September 22, 2005
This free webinar is intended to highlight relevant advanced modeling in the areas of fan design, realistic fan-system interactions, more realistic fan modeling approaches and discussion of possible ways to predict fan noise.
-
Fluid Mechanics and CFD Review Course by Fluent
Course, Fluent Inc., Lebanon, United States, September 21, 2005
This two and a half-day course is intended for those users who are new to CFD and who need an introduction (or re- introduction) to fluid mechanics, heat transfer and computational fluid dynamics. The goal is to make you more successful at CFD by having a more thorough knowledge of the underlying physics and numerical techniques in our software.
-
Introduction to FLUENT
Course, Fluent Inc., Ann Arbor, United States, September 19, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Icepak
Course, Fluent Inc., Santa Clara, United States, September 19, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Fluent Scandinavia User Group Meeting 2005
User Conference, Scandic Crown Hotel , Polhemsplatsen 3, Gothenburg, Sweden, September 19, 2005
Welcome to the Fluent Sweden Scandinavian User Group Meeting 2005, which take place on the 19-20 of September at the Scandic Crown, Polhemsplatsen in Gothenburg.
-
Advanced Thermal Modeling Course
Course, Icepak, Austin, United States, September 15, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Fluent Presents: Ask the Experts Online Forum: User-Defined Functions
Online Event, September 14, 2005
Our panel of flow modeling experts will be available via an online forum to answer your questions concerning user-defined functions (UDFs), Wednesday, September 14 from 2-3 p.m.
-
Quality and Reliability of CFD Simulations II: Industrial Challenges
Seminar, Senate Chamber, University of Nottingham, Nottingham, United Kingdom, September 13, 2005
This seminar brings together users of CFD to examine issues of accuracy, reliability and trust in the context of practical applications in engineering design, the environment, and health and safety management. The underlying theme is the useful exploitation of CFD in the face of uncertainty and complexity. The presentations will illustrate how to reduce uncertainty in CFD and how to derive most benefit from the technology, as well as raising awareness of current quality and trust initiatives.
-
Evolutionary Methods for Design, Optimisation and Control with Applications to Industrial and Societal Problems (EUROGEN 2005)
Conference, Arabella Sheraton Bogenhausen, Arabellastrasse 5, 81925 Munich, Germany, September 12, 2005
-
Introduction to FLUENT
Course, Fluent Inc., Lebanon, United States, September 12, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Airpak
Course, Fluent Inc., Lebanon, United States, September 12, 2005
The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.
-
Introduction to Airpak
Course, Los Angeles, United States, September 12, 2005
The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.
-
Introduction to Icepak
Course, Austin, United States, September 12, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Introduction to FLUENT
Course, Lebanon, United States, September 12, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Airpak
Course, Fluent Inc., Los Angeles, United States, September 12, 2005
The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.
-
14th International Meshing Roundtable
Conference, Bahia Hotel and Resort, San Diego, United States, September 11, 2005
The International Meshing Roundtable focuses on bringing together researchers and developers from academia, national labs and industry in a stimulating, open environment for the exchange of technical information related to mesh generation and general pre-processing techniques.
-
OpenFoam an Open Source code for Finite Volume Method: CFD simulations
Workshop, Chalmers Conference Center, Chalmersplatsen 1, Gothenburg, Sweden, September 7, 2005
Introduction to OpenFoam an object oriented library for Finite Volume Method.
-
SIMDI05
Conference, Chalmers Conference Center, Sweden, September 7, 2005
-
9th UK National Heat Transfer Conference
Conference, The University of Manchester, Manchester, United Kingdom, September 5, 2005
The scope of the conference spans all aspects of heat transfer and related mass transfer, including applications such as bio-systems, gas turbines and i.c. engines, materials processing, micro-systems, power and process engineering.
-
Free Workshop Seminar: Morpher Based Shape Optimization for CFD Applications
Seminar, The Westin Southfield Detroit, 1500 Town Center, Southfield, United States, August 25, 2005
Join Fluent, Detroit Engineered Products, Inc. and Engineous Software for a FREE WORKSHOP SEMINAR on Morpher Based Shape Optimization for CFD Applications on Thursday, August 25, 2005 from 8 am-12:30 pm.
-
Gridgen Training
Seminar, 9401 General Drive, Suite #131, Plymouth, United States, August 23, 2005
Are you interested in learning how to generate good grids in the shortest possible time? If so, you are invited to attend a free two-day Gridgen training course.
-
Introduction to FLUENT
Course, Fluent Inc., Lebanon, United States, August 22, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Airpak
Course, Dallas, United States, August 22, 2005
The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.
-
Introduction to Airpak
Course, Fluent Inc., Lebanon, United States, August 22, 2005
The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.
-
Direct Numerical Simulation of Turbulent Flows
Conference, Greece, August 20, 2005
The aim of our Special Session is discussion of Direct Numerical Simulation of turbulent flows and flows with hydrodynamical instability. The examples of flows are turbulent convection with and without rotation, flows in channels, flows with magnetic forces, mixing layer, flows with Rayleigh-Taylor, Kelvin-Helmholtz and Richtmyer-Meshkov instability.
-
Flowmaster Free Educational Webinar on Thermal System Analysis and its Importance in Fuel Economy Predictions
Online Event, August 18, 2005
Free educational webinar, 18 August. Thermal system analysis and its importance in fuel economy predictions. Open to automotive engineers involved in this field
-
Introduction to FLUENT
Course, Fluent Inc., Ann Arbor, United States, August 15, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Icepak
Course, Fluent Inc., Santa Clara, United States, August 15, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Surface Wrapping Webinar - CD-adapco
Online Event, August 15, 2005
By popular request, we are pleased to offer you the opportunity to take part in our Surface Wrapping webinar once more on August 15, 2005 (BST 5pm, EST noon, CST 11am, MST 10am, PST 9am). The webinar will once again demonstrate our all-new surface wrapping technology.
-
Training: Reacting Flow with FLUENT/KINetics
Course, USD Computer Technical Center, 3760 Convoy Street, Suite 100, San Diego, United States, August 12, 2005
Join us for a one-day training course on Reacting Flow Modeling is designed for existing users of FLUENT. The focus of the course is using FLUENT in conjunction with Reaction Design's KINetics module, which offers a new way to model detailed gas-phase and surface chemistry within FLUENT 6.2. The training course will be held on August 12, 2005, 9:00 am-5:30 pm
-
Introduction to Microfluidics
Course, International Center for Theoretical Physics, Trieste, Italy, August 8, 2005
The purpose of this School is to provide an introduction to the flow of fluids in micro/nano channels with examples chosen from a variety of areas such as biotechnology, chemical and aerospace engineering. It is open to graduate students and beginning researchers interested in the field, with backgrounds in science and engineering.
-
Introduction to FLUENT
Course, Fluent Inc., Lebanon, United States, August 8, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Icepak
Course, Austin, United States, August 8, 2005
This is a one-day advanced course that deals with advanced thermal systems and concepts. It includes modeling of PCBs, IC packages, interface resistances, altitude effects, radiation, heat pipes, joule heating, thermoelectric coolers, transformers, cold plates, baffles, wall effects, and external heaters/coolers.
-
Advanced Training in Fluent
Course, Fluent Inc., Lebanon, United States, August 1, 2005
This course is intended for experienced users of FLUENT v6 who are interested in more in-depth instruction on specific topics. Users may sign up for one or more days of instruction. Courses will consist of both lecture and hands-on examples.
-
CFD2005
Conference, Fairmount Newfoundland Hotel, St. John's, Canada, July 31, 2005
The 13th Annual Conference on Computational Fluid Dyanmics
-
ICEM CFD Advanced Meshing Seminar
Seminar, West Central 127, Milton Park, Didcot, United Kingdom, July 28, 2005
Registrations are invited for a free one-day seminar on the ICEM CFD mesh generation software. Anybody involved in mesh generation is welcome to register.
-
Introduction to FLUENT
Course, Fluent Inc., Ann Arbor, United States, July 25, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to FLUENT
Course, Fluent Inc., Lebanon, United States, July 25, 2005
This course is intended for people who have had little or no experience with FLUENT. New users of the software should register for the five-day training course.
-
Introduction to Airpak
Course, Fluent Inc., Lebanon, United States, July 25, 2005
The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.
-
Introduction to Airpak
Course, New York, United States, July 25, 2005
The training course is a combination of lectures with discussion and hands-on exercises to introduce the student to the basics of using Airpak, to familiarize the student with the user-interface, and also to begin a mutually beneficial partnership.
|
