CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Wiki > K-omega models

K-omega models

From CFD-Wiki

(Difference between revisions)
Jump to: navigation, search
 
(One intermediate revision not shown)
Line 2: Line 2:
== Introduction ==
== Introduction ==
-
The K-omega model is one of the most common [[Turbulence modeling|turbulence models]]. It is a [[Two equation models|two equation model]], that means, it includes two extra transport equations to represent the turbulent properties of the flow. This allows a two equation model to account for history effects like convection and diffusion of turbulent energy.
+
The K-omega model is one of the most commonly used [[Turbulence modeling|turbulence models]]. It is a [[Two equation models|two equation model]], that means, it includes two extra transport equations to represent the turbulent properties of the flow. This allows a two equation model to account for history effects like convection and diffusion of turbulent energy.
 +
 
The first transported variable is turbulent kinetic energy, <math>k</math>.  The second transported variable in this case is the specific dissipation, <math>\omega</math>. It is the variable that determines the scale of the turbulence, whereas the first variable, <math>k</math>, determines the energy in the turbulence.
The first transported variable is turbulent kinetic energy, <math>k</math>.  The second transported variable in this case is the specific dissipation, <math>\omega</math>. It is the variable that determines the scale of the turbulence, whereas the first variable, <math>k</math>, determines the energy in the turbulence.
 +
 +
To calculate boundary conditions for this model see [[Turbulence free-stream boundary conditions|turbulence free-stream boundary conditions]].
== Common used K-omega models ==
== Common used K-omega models ==

Latest revision as of 12:43, 12 October 2011

Turbulence modeling
Turbulence
RANS-based turbulence models
  1. Linear eddy viscosity models
    1. Algebraic models
      1. Cebeci-Smith model
      2. Baldwin-Lomax model
      3. Johnson-King model
      4. A roughness-dependent model
    2. One equation models
      1. Prandtl's one-equation model
      2. Baldwin-Barth model
      3. Spalart-Allmaras model
    3. Two equation models
      1. k-epsilon models
        1. Standard k-epsilon model
        2. Realisable k-epsilon model
        3. RNG k-epsilon model
        4. Near-wall treatment
      2. k-omega models
        1. Wilcox's k-omega model
        2. Wilcox's modified k-omega model
        3. SST k-omega model
        4. Near-wall treatment
      3. Realisability issues
        1. Kato-Launder modification
        2. Durbin's realizability constraint
        3. Yap correction
        4. Realisability and Schwarz' inequality
  2. Nonlinear eddy viscosity models
    1. Explicit nonlinear constitutive relation
      1. Cubic k-epsilon
      2. EARSM
    2. v2-f models
      1. \overline{\upsilon^2}-f model
      2. \zeta-f model
  3. Reynolds stress model (RSM)
Large eddy simulation (LES)
  1. Smagorinsky-Lilly model
  2. Dynamic subgrid-scale model
  3. RNG-LES model
  4. Wall-adapting local eddy-viscosity (WALE) model
  5. Kinetic energy subgrid-scale model
  6. Near-wall treatment for LES models
Detached eddy simulation (DES)
Direct numerical simulation (DNS)
Turbulence near-wall modeling
Turbulence free-stream boundary conditions
  1. Turbulence intensity
  2. Turbulence length scale

Introduction

The K-omega model is one of the most commonly used turbulence models. It is a two equation model, that means, it includes two extra transport equations to represent the turbulent properties of the flow. This allows a two equation model to account for history effects like convection and diffusion of turbulent energy.

The first transported variable is turbulent kinetic energy, k. The second transported variable in this case is the specific dissipation, \omega. It is the variable that determines the scale of the turbulence, whereas the first variable, k, determines the energy in the turbulence.

To calculate boundary conditions for this model see turbulence free-stream boundary conditions.

Common used K-omega models

  1. Wilcox's k-omega model
  2. Wilcox's modified k-omega model
  3. SST k-omega model

Miscellaneous

  1. Near-wall treatment for k-omega models
Retrieved from "https://ftp.cfd-online.com/Wiki/K-omega_models"
My wiki