Two phase flow
From CFD-Wiki
(→Introduction) |
|||
| Line 1: | Line 1: | ||
== Introduction == | == Introduction == | ||
| + | |||
| + | article in progress | ||
=== Importance of two phase flow in industrial configurations === | === Importance of two phase flow in industrial configurations === | ||
Revision as of 20:58, 23 January 2006
Contents |
Introduction
article in progress
Importance of two phase flow in industrial configurations
Two phase flow phenomena occur in various industrial application in all fluid mechanics application fiels. Aerospace, automotive, nuclear applications, etc. In all this domain, prediction of two phase behaviour is important. Prediction of liquid spray in an internal combustion engine should enable us to have a better control on combustion process and then to reduce pollutant emissions. Controlling water - steam equilibrium in a coller system enable to prevent from industrial accident, etc. Any other examples can be quoted here.
Overview of the different available approach
Two main family can be distinguished to model two phase flow, depending of the two phase configuration approach. In case of dispersed configuration a lagrangian approach is suitable. Such an approach consists in following dropplets (or bubbles) during then movement. This is done by applying external force on the particle and solving acceleration, then velocity and finally position. On the other hand, two phase flow can be solve with an eulerien approach. As in all eulerian framework, this approach consists in considering inlet and outlet flux in a given volume. In such an eulerian approach, two family can be distinguished : Mixture model and Two fluids model, those two approach will be detailed in corresponding section bellow.
